Mazak Cybertech Turn 5500M with 14.75″ Bore Multi-Tasking CNC Lathe, New 2008


Cybertech Turn 5500M

Lathes, Flat Bed, CNC

Stock #




Mazatrol 640MT Pro, Maximum Swing: 36.2, Bar Capacity: 14.76, Chuck Diameter: 33.4, Live Tooling: Yes, Lathe Type: Lathes, Combination, CNC Turning Center, Multi Tasking, Ideal for Oil Industry


Maximum swing 36.02”
Swing over cross slide upper turret 27.56”
Maximum machining diameter upper turret 31.89”
Maximum machining length upper turret 120”
Maximum support mass chuck work 13228 lbs
Maximum support mass shaft work 7716 lbs
Turning Spindle Turning Spindle
Rotating speed (min-1) 2 to 500
Through-hole diameter 14.76”
Spindle nose JIS A2-20”
Motor output (Continuous/Half-hourly rating) 47/37 kW
Maximum torque 8482 ft-lbf
Spindle hole type (MT) No. 6
Maximum thrust power 7868.3 lbf
Turret - Type – Bolt fixing type Type – Bolt fixing type
Number of tools mounted 12
Tool size outside turning 1.5”
Tool size inside turning 2.5”
Tool size milling drill 40mm
Tool size milling tap M30
Tool size end-mill 40mm
Indexing time (s) 0.4/step
Mill spindle speed (min-1) 25-3000
Milling output (Continuous/Half-hourly rating) 11/7.5 kW
Maximum torque of mill spindle (ft.lbf) 103.3
Feed Axe Rapid traverse X1 – 945 IPM
Feed Axes Rapid traverse Z1 – 1181 IPM
Feed Axes Rapid traverse Axis of tailstock – 236 IPM
Movement stroke X1 21.26”
Movement stroke Z1 123.23”
Movement stroke tailstock 120.08’’/100.39 (with work rest)
Coolant tank capacity (ft3) 28.25”
Power requirement (continuous) 85.81 kVA
Air pressure 70 psi
Total air required (regularly) 12.4 ANR
Machine Dimensions & Mass See Below
Height of centers 51.97”
Dimensions Length – 287.99”, Width – 143.03”, Height – 112.99”, Floor space required (ft2) – 228.19”
Control TypeMazatrol 640MT Pro
Bar Capacity14.76
Chuck Diameter33.4
Live ToolingYes
  • Mazatrol 640MT Pro
  • Hinge Chip Conveyor
  • 213 Hi Pressure Coolant
  • C Axis 0.001 deg. Incr.
  • 14.6” Spindle Bore
  • Multi Tap Transformer 230V-260V
  • Prep for Rear Manual Chuck – 33.46” Max
  • Long Boring Bar Stocker – (2) Bar
  • Long Boring Bar Holder w/o Bar 80mm ID for LBB Stocker
  • Long Boring Bar Holder w/o Bar 100mm ID for LBB Stocker
  • Manual Tool eye for 34”
  • Extended Tailstock
  • Re – Threading Function
  • Thread Start Point Function
  • SMW Steady Rest K6-Z
  • 33.4″ Schunk TB850 Extended Stroke Air Chuck Pckg
  • Rota Classic P800 4-Jaw Independent Manual Chuck for Rear
  • Tooling and Manuals