Brand
+GF+ MIKRON
Model
HSM 500
Type
Machining Centers, Vertical
Stock #
56238
Condition
Very Good
Year
2008
| CNC Control | yes |
| Type of CNC Control | HEIDENHAIN iTNC 530 |
| Tool Changer | 18 |
| Spindle Speed | 30,000 RPMs |
| Spindle taper | HSK-E40 |
| X axis | 19.7" (500 mm) |
| Y axis | 17.7" (450 mm) |
| Z axis | 500 mm (19.7") |
| Lateral, y | 450 mm (17.7") |
| Vertical, z | 350 mm (13.8") |
| 100-42,000 rpm, hsk-e40 taper | 11 kW/4.2 Nm (14.75 hp/3 lb/ft) |
| Feed rate/rapid traverse (x,y) | 20/40 m/min (787/1,575 IPM) |
| Feed rate/rapid traverse (z) | 40/40 m/min (1,575 IPM) |
| Clamping surface | 550 mm x 450 mm (21.7" x 17.7") |
| Max table load | 200 kg (441 lbs) |
| Height of table top front floor | 980 mm (38.6") |
| T-slot on table (nominal size x pitch x quantity) | 14 x 63 x 7 mm |
| Miscellaneous hsk-e40 tool holders | collet and shrink fit |
| Machine Hours - Cut/Run | 15457 Hours |
| Weight | 5500 kg (12,125 lb) |
| Heidendain iTNC 530 Control LCD Display Screen Donaldson Torit Filtration System Coolant System |
