SNK CMV-100/5 5-Axis CNC Horizontal Machining Center, with 8000 RPM, 1000mm Pallets, Coolant Thru, Fanuc 31i-B5, 40HP, Ran 20 parts (New 2016 - Installed 2017)



Machining Centers, Horizontal, (5-Axis or More)

Stock #




CNC Control yes
CNC Control Fanuc 31i-B5
Cutting Time Hours 5361
Main Specifications - See Below See Below
Table Size: 1000mm x 1000mm (39.3 x 39.3 in)
Distance from Pallet surface to spindle center 0-1,300mm (0 -51.1 in)
Distance from pallet surface to spindle end (when spindle is in vertical position) 0-1,000 mm (0-39.3 in)
Max Table Load 1,500 kg / table (3,300 lbs.)
Spindle: See Below
Spindle Speed 40 to 8,000 RPM
Spindle Nose Taper CT-50V (Dual face contact type)
Coolant Thru Spindle yes
Spindle motor drive VAC 30/22 kW (40/29.5 HP)
Torque N-m 26 to 653 Nm
Travels See Below
Table Longitudinal (X-Axis) 1,500 mm (59.0 in)
Column transverse (y-Axis) 1,330 (52.3 in)
Spindlehead vertical (Z-Axis) 1,300 mm (51.1 in)
Spindlehead tilt (A-Axis) +30 to -120 deg.
Table rotation (C-Axis) endless
Feedrates See Below
Rapid Traverse - X,Y,Z 40 m/min (1574 in)
Rapid traverse - A-Axis 2,880 dpm
Rapid traverse, C-Axis 2,880 dpm
Feedrate - X, Y, Z -Axis 1 - 20,000 mm/min (0.001 to 787.4 ipm)
Feedrate A-Axis 0 to 2,880 dpm
Feedrate - C-Axis 0 - 2,880 dpm
Automatic Tool Changer (ATC) 80 Tools
Automatic Pallet Changer (APC) 2 - Pallets - 1,000 x 1,000 mm (39 x 39 in)
Free Purpose 6099
Machine Run Time 2785
See Note Below:

Fanuc 31i-B5 CNC Control
Automatic Tool Changer (ATC) 80 Tools
Automatic Pallet Changer (APC) - Two (2) Pallets
Splashguard (Full Enclosurer
Large capacity coolant tank with 2 conveyors + 1 conveyor with coolant tank
Absolent oil mist filter system
Thru Spindle Coolant (7MPa, 15lit/min)
Air Blow Device
Automatic measuring and alignment function (RMP-60 or equivalent
Automatic tool length and tool diameter measuring and compensating function (laser type)
Caron Engineering TMAC (tool monitoring adaptive control) for monitoring spindle horsepower in real time providing reductions in cycle times: to 20-60%to machine with an optimal feed rate.
Spindle overload preventing function
Three lamp indication light
Four flood coolant nozzles
Shower Coolant System
Six extra spare M code functions
Scale feedback X, Y, Z, A and C

Hours on the Machine as of 10/18/2022
Power ON:   54138 H
Run Time:      2785 H
Cutting Time: 5361 H
Free Purpose: 6099 H

Machine is Under Power and Ready to be inspected.
Cost to dismantle and move the machine is the responsibility of the buyer.

NOTE:  SNK at the factory in JAPAN is quoting 15-24 Months for a delivery on NEW 5 axis machines. An associate of ours was at SNK, 2-weeks ago, this was their report as told to them in the factory.